Issue 23, 2024

A green oxidizer based on 1,2,3-triazole with a high oxygen balance of +23.3%: a promising replacement of ammonium perchlorate in solid propellants

Abstract

A novel 1,2,3-triazole-based green oxidizer 4-nitro-2,5-bis(trinitromethyl)-1,2,3-triazole (JY-23) with high oxygen balance (OBco2 = +23.3%) was synthesized in 5 steps from 4-cyano-5-nitro-1H-1,2,3-triazole. Its structure was confirmed by NMR, IR, elemental analysis and single crystal X-ray diffraction. It exhibits a high density (1.931 g cm−3), a high positive enthalpy of formation (ΔfH = +294.81 kJ mol−1), and acceptable mechanical sensitivities (IS = 11 J and FS = 42 N), and, importantly, it is non-hydroscopic. The contribution of JY-23 to the specific impulse of solid propellants as a replacement for ammonium perchlorate (AP) in typical HTPB (hydroxyl terminated polybutadiene) and GAP (glycidyl azide polymer) solid propellants was calculated using NASA-CEA software. The results show that the replacement of AP with JY-23 results in a much higher specific impulse compared to some previously reported oxidizers, suggesting its potential application as a green oxidizer to replace AP in solid propellants.

Graphical abstract: A green oxidizer based on 1,2,3-triazole with a high oxygen balance of +23.3%: a promising replacement of ammonium perchlorate in solid propellants

Supplementary files

Article information

Article type
Communication
Submitted
11 Mar 2024
Accepted
15 May 2024
First published
23 May 2024

J. Mater. Chem. A, 2024,12, 13682-13688

A green oxidizer based on 1,2,3-triazole with a high oxygen balance of +23.3%: a promising replacement of ammonium perchlorate in solid propellants

P. Zhao, L. Chen, Q. Zhang, Y. Ling, Q. Lin, H. Huang and J. Yang, J. Mater. Chem. A, 2024, 12, 13682 DOI: 10.1039/D4TA01653J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements