Issue 18, 2024

Fe–Co heteronuclear atom pairs as catalytic sites for efficient oxygen electroreduction

Abstract

Single-site Fe–N–C catalysts are the most promising Pt-group catalyst alternatives for the oxygen reduction reaction, but their application is impeded by their relatively low activity and unsatisfactory stability as well as production costs. Here, cobalt atoms are introduced into an Fe–N–C catalyst to enhance its catalytic activity by utilizing the synergistic effect between Fe and Co atoms. Meanwhile, phenanthroline is employed as the ligand, which favours stable pyridinic N-coordinated Fe–Co sites. The obtained catalysts exhibit excellent ORR performance with a half-wave potential of 0.892 V and good stability under alkaline conditions. In addition, the excellent ORR activity and durability of FeCo–N–C enabled the constructed zinc–air battery to exhibit a high power density of 247.93 mW cm−2 and a high capacity of 768.59 mA h gZn−1. Moreover, the AEMFC based on FeCo–N–C also achieved a high open circuit voltage (0.95 V) and rated power density (444.7 mW cm−2), surpassing those of many currently reported transition metal-based cathodes. This work emphasizes the feasibility of this non-precious metal catalyst preparation strategy and its practical applicability in fuel cells and metal–air batteries.

Graphical abstract: Fe–Co heteronuclear atom pairs as catalytic sites for efficient oxygen electroreduction

Supplementary files

Article information

Article type
Paper
Submitted
06 Jan 2024
Accepted
08 Apr 2024
First published
22 Apr 2024

Nanoscale, 2024,16, 8941-8949

Fe–Co heteronuclear atom pairs as catalytic sites for efficient oxygen electroreduction

Z. Sun, R. Gao, F. Liu, H. Li, C. Shi, L. Pan, Z. Huang, X. Zhang and J. Zou, Nanoscale, 2024, 16, 8941 DOI: 10.1039/D4NR00077C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements