Issue 26, 2024

Promoted oxygen reduction performance enabled by Co/Cu nanoparticles encapsulated in carbon nanotubes for long-life flexible and rechargeable Zn–air batteries

Abstract

Rechargeable zinc–air batteries have been extensively studied as a potential solution for overcoming the challenges of energy crises and achieving sustainable development. The primary bottleneck of zinc–air batteries is the lack of efficient and low-cost dual-functional catalysts. In this study, we successfully prepared carbon nanotube-encapsulated bimetallic Co/Cu (Co/Cu0.2@NC) catalysts that exhibit excellent ORR (E1/2 = 0.838 V) and OER (overpotential of 322 mV at 10 mA cm−2) performances, exceeding those of the commercial RuO2 and Pt/C catalysts. Furthermore, rechargeable liquid zinc–air batteries prepared using the Co/Cu0.2@NC catalysts show a high power density (171.44 mW cm−2), a high open circuit voltage (1.485 V), and a long life with stability for 2400 cycles (or 400 h). More importantly, flexible zinc–air batteries prepared using this catalyst exhibit a peak power density of 70.8 mW cm−2 and a superior stability for 480 cycles (or 80 h). This excellent dual-functional catalyst has great potential for zinc–air battery and other energy storage applications.

Graphical abstract: Promoted oxygen reduction performance enabled by Co/Cu nanoparticles encapsulated in carbon nanotubes for long-life flexible and rechargeable Zn–air batteries

Supplementary files

Article information

Article type
Paper
Submitted
26 Dec 2023
Accepted
25 May 2024
First published
13 Jun 2024

New J. Chem., 2024,48, 11767-11775

Promoted oxygen reduction performance enabled by Co/Cu nanoparticles encapsulated in carbon nanotubes for long-life flexible and rechargeable Zn–air batteries

N. Hong, X. Liu, X. Li, S. Peng, C. Liu, H. Li, J. Zeng, T. Liang and X. Qi, New J. Chem., 2024, 48, 11767 DOI: 10.1039/D3NJ05928F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements