Issue 10, 2024

High performance photodetectors based on In2S3, In2S1.5Se1.5 and In2Se3 nanostructures

Abstract

One-dimensional (1D) nanostructures, including nanofibers, nanocubes, and nanoplates of In2S3, In2S1.5Se1.5, and In2Se3 semiconductors, were synthesized using a hydrothermal technique for studying their photodetector behaviour. Photocurrent measurements demonstrate that semiconducting In2Se3 1D nanofibers display an exceptional response to white light, with a photo responsivity of 185.8 mA W−1 and a detectivity of 22.6 × 109 Jones, which is four times greater than that of In2S3 and In2S1.5Se1.5 nanostructures. The response times of the In2Se3 photodetectors are impressively short, measuring only 8.8 seconds. The superior responsivity detectivity and faster response time of the 1D In2Se3 nanofibers can be attributed to their large surface area, which boosts light absorption and facilitates efficient charge transfer, thereby enhancing the overall device performance.

Graphical abstract: High performance photodetectors based on In2S3, In2S1.5Se1.5 and In2Se3 nanostructures

Supplementary files

Article information

Article type
Paper
Submitted
05 Oct 2023
Accepted
21 Mar 2024
First published
21 Mar 2024
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2024,5, 4178-4186

High performance photodetectors based on In2S3, In2S1.5Se1.5 and In2Se3 nanostructures

A. J. Khimani, S. A. Kadam, R. Kr. Giri, C. K. Zankat and Y. Ma, Mater. Adv., 2024, 5, 4178 DOI: 10.1039/D3MA00808H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements