Issue 12, 2024

Optimal facet assembly of multi-transition metal layered cathodes toward superior Li-ion kinetics and structural stability

Abstract

The surface stability of layered cathode materials is a critical determinant of their chemo-mechanical reversibility during intercalation/deintercalation. This is possibly because of the migration of transition metals (TMs) into the Li layer followed by O redox, which decreases the O vacancy formation energy and thereby destabilizes the anionic framework. Hence, elucidating an optimal assembly of surface facets is a key strategy for further stabilizing the characteristic R3m structure to allow higher capacities and states of charging. In this study, three single-crystal samples of LiNi0.33Co0.33Mn0.33O2 (NCM111) with varied surface facets were synthesized and compared. After cycling, (012) facets had higher losses of Li and O atoms than (104) facets, leading to excessive Mn reduction. The formation of rocksalt structures and the loss of Li-ion migration pathways during extended cycling primarily resulted from irreversible compositional change of the (012) facets. Through electrochemical single-particle simulations we could establish a correlation between degraded surface structures and inferior electrochemical properties. The simulation indicated that the complete degradation of (012) facets is accompanied by an overpotential of approximately 0.2 V, leading to severe voltage hysteresis, which agrees well with our experimental findings. This study provides an important insight into the ideal assembly of surface facets in layered cathode materials that will help future cathode research realize more stable surface structures with even higher capacities and states of charging.

Graphical abstract: Optimal facet assembly of multi-transition metal layered cathodes toward superior Li-ion kinetics and structural stability

Supplementary files

Article information

Article type
Paper
Submitted
20 Feb 2024
Accepted
15 May 2024
First published
22 May 2024

Energy Environ. Sci., 2024,17, 4319-4326

Optimal facet assembly of multi-transition metal layered cathodes toward superior Li-ion kinetics and structural stability

F. Zou, J. Kim, J. Zhang, G. Lee, L. Lyu, J. Choi, T. Kankaanpää, Y. M. Lee and Y. Kang, Energy Environ. Sci., 2024, 17, 4319 DOI: 10.1039/D4EE00794H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements