Issue 14, 2024

Consistent interpretation of isotope and chemical oxygen exchange relaxation kinetics in SrFe0.85Mo0.15O3−δ ferrite

Abstract

This paper is devoted to the study of phase composition and kinetic and thermodynamic characteristics of Mo-doped strontium ferrite SrFe0.85Mo0.15O3−δ (SFM15) under oxygen-conducting membrane working conditions. Single-phase SFM15 with a cubic Pm[3 with combining macron]m structure was synthesized using a ceramic method. It was shown that the molybdenum introduction stabilizes the perovskite cubic structure over a wide range of oxygen pressures and temperatures, preventing the bulk phase transition at high temperatures. Oxygen exchange constants, diffusion coefficients and activation energy of oxygen exchange were obtained using oxygen relaxation and isotopic exchange techniques, and the obtained values are consistent with known literature data. It was shown that the surface reaction rates obtained using chemical and tracer relaxation methods are quantitatively comparable with each other, despite significantly different experimental conditions. This result not only confirms the reliability of the data obtained by independent methods, but also allows one to expand the area of physical conditions for studying the kinetics of oxygen transfer where another method has technical or methodological limitations.

Graphical abstract: Consistent interpretation of isotope and chemical oxygen exchange relaxation kinetics in SrFe0.85Mo0.15O3−δ ferrite

Supplementary files

Article information

Article type
Paper
Submitted
09 Nov 2023
Accepted
01 Mar 2024
First published
05 Mar 2024

Phys. Chem. Chem. Phys., 2024,26, 10589-10598

Consistent interpretation of isotope and chemical oxygen exchange relaxation kinetics in SrFe0.85Mo0.15O3−δ ferrite

M. Arapova, S. Chizhik, O. Bragina, R. Guskov, V. Sobolev and A. Nemudry, Phys. Chem. Chem. Phys., 2024, 26, 10589 DOI: 10.1039/D3CP05441A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements