Quantitative analysis of microplastics in seawater based on SERS internal standard method

Abstract

Microplastics can enter the human body through the food chain and can cause cardiovascular or cerebrovascular diseases; thus, it is essential to detect microplastics sensitively and accurately. Traditional methods have some drawbacks, such as a low sensitivity and complicated experimental procedures, so it is difficult to detect microplastics less than 1 μm. While surface enhanced Raman scattering technology can compensate for these shortcomings, there are fewer reports on the quantitative detection of microplastics using SERS technology. In this study, SERS and an internal standard method were utilized to detect microplastics qualitatively and quantitatively. The electric field enhancement effect of common gold, silver, and copper substrates were simulated by the finite element method, and the influence rule of structural parameters on the enhancement factor was obtained to optimize structural parameters. Subsequently, a gold nanopyramid array substrate was prepared using the colloidal sphere template method. Finally, the prepared substrate was applied to detect polystyrene microplastics with a diameter of 500 nm, and the detection of limit is 1.8 × 10⁻⁴ mg mL⁻¹ in the quantitative range of 2–2 × 10⁻⁴ mg mL⁻¹, and the correlation coefficient of the linear regression equation is 0.9918. The experimental results showed that this proposal has a lower detection limit and a wider quantitative range and expands ideas for the qualitative and quantitative detection of microplastics in seawater.