Issue 33, 2023

High-performance ultra-low-voltage organic field-effect transistors based on anodized TiOx dielectric and solution-sheared organic single crystals

Abstract

Organic field-effect transistors (OFETs) are promising building blocks for wearable electronics applications due to their low processing temperature and mechanical flexibility. The OFETs for such applications are expected to operate at a low voltage that is within the range of portable batteries. An anodized TiOx dielectric is a promising device for reducing power consumption by decreasing the gate-source voltage of OFETs, but this often leads to poor OFET performance due to the large surface roughness. This work presents an optimal solution for achieving ultra-low-voltage (at 1 V) device operation using an anodized TiOx/PS hybrid dielectric combined with a solution-sheared organic single-crystal thin film. The anodized TiOx produces a high unit-area capacitance of up to 2500 nF cm−2 with good uniformity, and the organic single-crystal thin film achieves a high carrier mobility of 4.5 cm2 V−1 s−1 and a low threshold voltage of 0.13 V. The use of a polystyrene layer and TiOx as the gate dielectric demonstrates the systematic optimization of OFETs and their great potential in high-performance, ultra-low-voltage organic circuit applications.

Graphical abstract: High-performance ultra-low-voltage organic field-effect transistors based on anodized TiOx dielectric and solution-sheared organic single crystals

Supplementary files

Article information

Article type
Paper
Submitted
06 Apr 2023
Accepted
26 Jul 2023
First published
01 Aug 2023

J. Mater. Chem. C, 2023,11, 11361-11368

High-performance ultra-low-voltage organic field-effect transistors based on anodized TiOx dielectric and solution-sheared organic single crystals

B. Geng, F. Zhang, X. Ding, L. Liu, Y. Chen, S. Duan, X. Ren and W. Hu, J. Mater. Chem. C, 2023, 11, 11361 DOI: 10.1039/D3TC01205K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements