Issue 29, 2023

Polycrystalline La0.66Gd0.04Ca0.3MnO3 for magnetic-response applications: concurrent anisotropic magnetoresistance and magneto-transport under a low magnetic field

Abstract

Polycrystalline manganites with outstanding anisotropic magnetoresistance and temperature coefficient of magnetization have great potential for application in magnetic sensors. Recent studies have shown that altering the ion occupation ratio would induce Jahn–Teller distortion and affect the spin–orbital coupling effect, consequently enhancing anisotropic magnetoresistance and temperature coefficient of magnetization. In this study, single-phase polycrystalline La0.7−xGdxCa0.3MnO3 ceramics were fabricated via a simple nonaqueous sol–gel technique. The optimal Gd doping concentration induced the strongest Jahn–Teller distortion, as was confirmed through the Curie–Weiss behavior of the ceramics. Finally, these ceramics demonstrated the relatively large anisotropic magnetoresistance and temperature coefficient of magnetization (−30% and −28.1%/K, respectively) values under a low magnetic field of 1 T. The enhanced anisotropic magnetoresistance properties were derived from the spin–orbital coupling effect as demonstrated by the classical transport model.

Graphical abstract: Polycrystalline La0.66Gd0.04Ca0.3MnO3 for magnetic-response applications: concurrent anisotropic magnetoresistance and magneto-transport under a low magnetic field

Supplementary files

Article information

Article type
Paper
Submitted
14 Mar 2023
Accepted
27 Jun 2023
First published
03 Jul 2023

J. Mater. Chem. C, 2023,11, 10079-10091

Polycrystalline La0.66Gd0.04Ca0.3MnO3 for magnetic-response applications: concurrent anisotropic magnetoresistance and magneto-transport under a low magnetic field

S. Yang, J. Li, J. Hu, R. Xu, H. Zhang, L. Kong, X. Liu, J. Ma and Q. Chen, J. Mater. Chem. C, 2023, 11, 10079 DOI: 10.1039/D3TC00925D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements