Issue 42, 2023

Biomimetic integrated gas diffusion layer inspired by alveoli for enhanced air-breathing fuel cell performance and stability

Abstract

Air-breathing proton exchange membrane fuel cells (air-breathing PEMFCs) have the advantages of portability, simple structure, environmental friendliness and no noise. However, due to their open cathode structure and operation environment, including gas diffusion, water and thermal management, PEMFCs are difficult to manage and largely influence the fuel cell performance and durability. In this study, inspired by alveoli, a biomimetic integrated gas diffusion layer (GDL) is designed to effectively improve the operation environment of the air-breathing PEMFC. The fuel cell using the biomimetic integrated GDL shows higher performance and more stability than a traditional fuel cell under various temperatures and wind speeds. The air-breathing PEMFC with biomimetic integrated GDL showed high performance with a peak power density of 148.5 mW cm−2, which is superior to the traditional air-breathing PEMFC's density of 109.8 mW cm−2. Additionally, at the cathode wind speed of 4 m s−1, the fuel cell performance using the biomimetic integrated GDL only decreases by 2.38% after discharge at 150 mA cm−2 for 100 h, while that of the traditional fuel cell declines by 64.5% in 10 minutes. Moreover, the fuel cell stack exhibits 17.5 W at 3.17 V and the performance declines by only 11.8% after discharge for 200 h under 3.5 A. The biomimetic integrated GDL offers a simple and effective approach to achieving high performance and stability for air-breathing PEMFC.

Graphical abstract: Biomimetic integrated gas diffusion layer inspired by alveoli for enhanced air-breathing fuel cell performance and stability

Supplementary files

Article information

Article type
Paper
Submitted
04 Aug 2023
Accepted
04 Oct 2023
First published
05 Oct 2023
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2023,11, 23001-23011

Biomimetic integrated gas diffusion layer inspired by alveoli for enhanced air-breathing fuel cell performance and stability

Z. Chai, F. Ning, Q. Wen, P. Liu, C. He, W. Li, X. Dan, P. Xu, Y. Liu, Y. Li and X. Zhou, J. Mater. Chem. A, 2023, 11, 23001 DOI: 10.1039/D3TA04633H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements