Issue 1, 2023

Chemically suppressing redox reaction at the NiOx/perovskite interface in narrow bandgap perovskite solar cells to exceed a power conversion efficiency of 20%

Abstract

NiOx as a type of inorganic hole-transporting layer (HTL) material in narrow bandgap perovskite solar cells (NBG PSCs) showed exceptional stability but suffered a considerably poorer performance compared with NBG PSCs with commonly used PEDOT:PSS as the HTL. Herein, we found that redox reactions would occur at the interface between Ni3+ on the NiOx surface and the easily oxidized Sn2+ in the perovskite, causing considerable non-radiative recombination centers. On this basis, we proposed a bifacial reduction strategy at the interface to boost the performance of NBG PSCs. By using a reductive reagent ascorbic acid to reduce the Ni3+/Ni2+ ratio on the surface of NiOx beforehand, the possibility of contact between Ni3+ on the surface of NiOx and perovskite is chemically reduced substantially, suppressing the redox reaction between them as well as the non-radiative recombination at the interface. By applying this strategy, the device's power conversion efficiency is elevated from 17.81% to 20.48%, with 91% remaining after 1128 hours of storage in a nitrogen-filled glovebox.

Graphical abstract: Chemically suppressing redox reaction at the NiOx/perovskite interface in narrow bandgap perovskite solar cells to exceed a power conversion efficiency of 20%

Supplementary files

Article information

Article type
Paper
Submitted
05 Aug 2022
Accepted
14 Nov 2022
First published
19 Nov 2022

J. Mater. Chem. A, 2023,11, 205-212

Chemically suppressing redox reaction at the NiOx/perovskite interface in narrow bandgap perovskite solar cells to exceed a power conversion efficiency of 20%

H. Bian, J. You, C. Xu, X. He, M. Wang, Y. Yao, W. Zeng, P. Guo, H. Zhou, D. Lu, Z. Dai, S. Zhang and Q. Song, J. Mater. Chem. A, 2023, 11, 205 DOI: 10.1039/D2TA06211A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements