Issue 35, 2023

Study on the relationships between the oil HLB value and emulsion stabilization

Abstract

In order to study the relationship between the HLB value of oil and emulsion stabilization, the optimal formation of emulsification system was determined, and then, the properties of emulsion, such as particle size, stability, interfacial tension and zeta potential, were tested by laser particle analyzer, stability analyzer, and interfacial tensiometer. Experimental results showed that the optimal ratio of emulsification was Tween 80 : Span 80 = 5 : 5. Meanwhile, when the HLB value of the emulsification system was close to that of oil, the emulsion exhibited the best stability. This phenomenon is due to the fact that when the HLB values are close, the surfactant molecules are arranged more closely on the oil–water interface, leading to smaller sized emulsion droplet, which is conducive to emulsion stability. This study provides new insights into the effective adjustment of emulsion stability.

Graphical abstract: Study on the relationships between the oil HLB value and emulsion stabilization

Article information

Article type
Paper
Submitted
10 Jul 2023
Accepted
01 Aug 2023
First published
18 Aug 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 24692-24698

Study on the relationships between the oil HLB value and emulsion stabilization

Q. Wang, H. Zhang, Y. Han, Y. Cui and X. Han, RSC Adv., 2023, 13, 24692 DOI: 10.1039/D3RA04592G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements