Issue 10, 2023

Recovery of FLiBe from ThF4–FLiBe salt using precipitation–distillation coupled method

Abstract

The low-pressure distillation of FLiBe salt containing ThF4 was carried out at 1223 K and <10 Pa using thermogravimetric equipment. The weight loss curve indicated a rapid distillation stage at the beginning of distillation, followed by a slow stage. The composition and structure analyses showed that the rapid distillation process originated from the evaporation of LiF and BeF2, while the slow distillation process was mainly attributed to the evaporation of ThF4 and LiF complexes. Precipitation–distillation coupled method was employed for the recovery of FLiBe carrier salt. XRD analysis indicated that ThO2 was formed and remained in the residue with the addition of BeO. Our results showed that the combination of precipitation and distillation treatment was an effective way to recover carrier salt.

Graphical abstract: Recovery of FLiBe from ThF4–FLiBe salt using precipitation–distillation coupled method

Article information

Article type
Paper
Submitted
13 Jan 2023
Accepted
09 Feb 2023
First published
27 Feb 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 6637-6642

Recovery of FLiBe from ThF4–FLiBe salt using precipitation–distillation coupled method

Y. Luo, J. Dai, Q. Dou, H. Fu and Q. Li, RSC Adv., 2023, 13, 6637 DOI: 10.1039/D3RA00253E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements