Issue 5, 2023, Issue in Progress

Synthesis and properties of SiO2/SiO2@Ag two-phase STFs

Abstract

Soft body armor with a strain-sensing function using conductive shear thickening fluids (STFs) has gradually gained research interest. In this study, conductive SiO2@Ag core–shell microspheres were synthesized and the influence of process parameters on their properties was evaluated. Subsequently, SiO2 and SiO2@Ag were used as dispersed phases to prepare two-phase STFs, the effect of the core–shell microspheres' proportion on the rheological properties of the STFs was investigated, and its mechanism was discussed. The results indicated that SiO2@Ag core–shell microspheres were coated with elemental silver and when the concentration of sodium hydroxide and glucose were 0.07 and 0.09 mol L−1, respectively, the coating surface was the most uniform and compact, and the conductivity reached the minimum value of 0.56 Ω cm. The two-phase STFs exhibited good and reversible shear thickening behaviors and the critical shear rate decreased with increasing core–shell microsphere concentration. Additionally, when the mass fraction of SiO2 and SiO2@Ag core–shell microspheres was 45% and 20%, respectively, the thickening rate was 325%, and the resistance of two-phase STFs decreased simultaneously with the emergence of shear thickening that reached the lowest value of 795.16 kΩ. This study provides a novel strategy for synthesizing conductive STFs for strain-sensing flexible stab-resistant composites.

Graphical abstract: Synthesis and properties of SiO2/SiO2@Ag two-phase STFs

Supplementary files

Article information

Article type
Paper
Submitted
31 Oct 2022
Accepted
16 Jan 2023
First published
23 Jan 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 3112-3122

Synthesis and properties of SiO2/SiO2@Ag two-phase STFs

C. He, Q. Wang, X. Jia, J. Liu, R. Sun and M. Chen, RSC Adv., 2023, 13, 3112 DOI: 10.1039/D2RA06895H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements