Issue 6, 2023

Self-assembly of Co-doped MnO2 nanorod networks with abundant oxygen vacancy-modified separators for high-performance Li–S batteries

Abstract

Lithium–sulfur batteries (LSBs) are broadly considered to be the most promising next-generation energy storage because of their ultrahigh theoretical energy density and cost-effectiveness. However, the “shuttle effect” and sluggish conversion kinetics of polysulfides severely hinder their practical application. To address these challenges, a unique Co-doped MnO2 nanorod network layer with oxygen vacancies (Co-MnOx) was devised by self-assembly on a commercial separator through the chemical growth method for high-performance LSBs. The Co-MnOx modified separators (Co-MnOx@PP) not only effectively alleviate the “shuttle effects” but also accelerate the redox conversion of polysulfides. More importantly, the Co-MnOx@PP demonstrated superior thermostability and flame-retardant properties owing to the chemical growth method. The LSBs with Co-MnOx@PP separators exhibited a high reversible capacity of 902.0 mA h g−1 and 562.2 mA h g−1 at 0.5 C for 20 °C and 60 °C after 200 cycles, respectively. Even at 3 C, after 500 cycles, a superb cycling performance of 715.2 mA h g−1 with an ultra-low decay of 0.069% for each cycle was achieved. Therefore, this proposed strategy of a Co-doped MnO2 nanorod network layer with oxygen vacancies will provide a new route for rationally devising durable and efficient LSBs.

Graphical abstract: Self-assembly of Co-doped MnO2 nanorod networks with abundant oxygen vacancy-modified separators for high-performance Li–S batteries

Supplementary files

Article information

Article type
Research Article
Submitted
11 Sep 2022
Accepted
06 Feb 2023
First published
07 Feb 2023

Inorg. Chem. Front., 2023,10, 1775-1785

Self-assembly of Co-doped MnO2 nanorod networks with abundant oxygen vacancy-modified separators for high-performance Li–S batteries

C. Cai, L. Wu, Z. Cai, F. Yu, L. Zhang, L. Wang, T. Mei, L. Lin and X. Wang, Inorg. Chem. Front., 2023, 10, 1775 DOI: 10.1039/D2QI01960D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements