Issue 21, 2023

Recycling expired pharmaceutical drugs as redox materials for efficient and sustainable flexible supercapacitors

Abstract

Pharmaceutical drugs are abundantly wasted worldwide, leading to the contamination of water sources. By taking into account the problem of sustainable energy generation/storage, here we propose a method for the fabrication of supercapacitors (SCs) with expired drug powders. SCs were assembled by using expired drug powders of diclofenac (DICLO) and ibuprofen (IBU), which were deposited on the SC electrodes. First, a reference device was fabricated without drug powder, and showed a low capacitance of 102.2 F g−1 and an energy density of 20.5 W h kg−1. In contrast, the devices made with DICLO and IBU powders exhibited capacitances of 362.7 and 744.8 F g−1, respectively. This represents an enhancement of capacitance by 2.5–6.3 times after adding the drug powders. Also, the highest value of energy density (103.5 W h kg−1) was demonstrated by the device made with IBU. After the analysis of the SC electrodes with XPS, FTIR and absorbance techniques, we found a higher content of redox centers (oxygen functionalities and oxygen vacancies) in the SCs with IBU, which showed the best electrochemical performance. Moreover, the presence of the drug powder stabilized the output voltage in the range of 0.5–1 V for 10 h, which was not observed in SCs made without drug powders.

Graphical abstract: Recycling expired pharmaceutical drugs as redox materials for efficient and sustainable flexible supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
02 Feb 2023
Accepted
25 Apr 2023
First published
26 Apr 2023

New J. Chem., 2023,47, 10090-10104

Recycling expired pharmaceutical drugs as redox materials for efficient and sustainable flexible supercapacitors

L. Ojeda, J. Oliva, A. I. Oliva and C. R. Garcia, New J. Chem., 2023, 47, 10090 DOI: 10.1039/D3NJ00497J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements