Issue 14, 2023

Highly selective CO2 sensing response of lanthanum oxide nanoparticle electrodes at ambient temperature

Abstract

Lanthanum oxide nanoparticles (La2O3 NPs) are attractive rare earth metal oxides because of their applications in optical devices, catalysts, dielectric layers, and sensors. Herein, we report room temperature operative carbon dioxide gas sensing electrodes developed by a simple sonication assisted hydrothermal method. The physiochemical, morphological and gas-sensing properties of the prepared nanoparticles were studied systematically and their successful preparation was confirmed with the absence of impurities and high selectivity towards CO2. The fabricated sensor showed a high sensitivity of 40% towards CO2 at 50 ppm, and it can detect concentrations of up to 5 ppm with a quick response time of 6 s and recovery of 5 s. The electrode demonstrated long-term stability of 95% for 50 days when tested with an interval of 10 days. This simple and cost-effective method shows great potential for fabricating room temperature CO2 gas sensors.

Graphical abstract: Highly selective CO2 sensing response of lanthanum oxide nanoparticle electrodes at ambient temperature

Article information

Article type
Paper
Submitted
27 Mar 2023
Accepted
19 May 2023
First published
07 Jun 2023
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2023,5, 3761-3770

Highly selective CO2 sensing response of lanthanum oxide nanoparticle electrodes at ambient temperature

A. Eswaran, M. Thirumalainambi, R. Subramaniam and G. Annadurai, Nanoscale Adv., 2023, 5, 3761 DOI: 10.1039/D3NA00199G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements