Issue 8, 2023

Sustainable surgical masks: optimizing fine/ultrafine particle filtration using PVA/chitosan electrospun nanofibers

Abstract

Disposable surgical masks have emerged as a solution to the increasing demand for protection against fine/ultrafine particulate matter. This was prompted by the SARS-CoV-2 pandemic and the escalating levels of air pollution in major cities. However, as non-degradable polymers, surgical masks are discarded into the environment and become pollutants. This study produced biodegradable nanofibers via electrospinning, using polyvinyl alcohol (PVA) and chitosan (CS) as substitutes for traditional polymers in a three-layer commercial surgical mask (CSM). Electrospinning production parameters were modeled using response surface methodology and optimized using the desirability method. Then, the air filtration properties, including quality factor (Qf), collection efficiency (η), pressure drop (ΔP) and permeability (K1), were compared with CSM. The main objective was to produce electrospun mats with filtration of fine/ultrafine particles similar to those obtained for the CSM (η: 42.84–67.80% and ΔP: 29.3–32.2 Pa). Subtle variations in production parameters significantly affected the material, with the electric field being the most relevant parameter. The optimized samples OEV(↓K1) and OEV(↓Qf) presented the highest η values (96.27 and 96.58%, respectively), matching the N95 filtration efficiency and complying with international regulations. Their optimal experimental sets were, respectively, 25.01 and 23.39 kV of tension applied for the electrical field, 0.92 and 1.17 mL h−1 of flow rate, and 24.87 and 27.93 min of production time. Notably, nanofibers were more effective than the CSM in capturing particles close to the nanoscale range, such as airborne viruses and fine/ultrafine air pollution. The PVA/CS electrospun membranes are becoming promising alternatives to substitute non-degradable polymers in surgical masks.

Graphical abstract: Sustainable surgical masks: optimizing fine/ultrafine particle filtration using PVA/chitosan electrospun nanofibers

Supplementary files

Article information

Article type
Paper
Submitted
25 Mar 2023
Accepted
06 Jul 2023
First published
07 Jul 2023

Environ. Sci.: Nano, 2023,10, 2185-2200

Sustainable surgical masks: optimizing fine/ultrafine particle filtration using PVA/chitosan electrospun nanofibers

G. C. da Mata, M. S. Morais, W. P. de Oliveira and M. L. Aguiar, Environ. Sci.: Nano, 2023, 10, 2185 DOI: 10.1039/D3EN00182B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements