Issue 44, 2023

A well-dispersed OV-NiCo2O4 nanosphere modified separator for Li–S batteries

Abstract

The commercialization of lithium–sulfur batteries is facing great challenges, such as the “shuttle effect” and the poor conductivity of sulfur and Li2S2/Li2S, so it is extremely important to design new separator-modified materials with fast charge transfer capability and effective immobilization of polysulfides (LiPSs) to facilitate their conversion to address these challenges. In this paper, we propose a simple way to synthesize NiCo2O4 nanospheres containing oxygen vacancies (OV-NiCo2O4 NSs) and thus modify the separator. The synthesized OV-NiCo2O4 NSs accelerated the conversion of LiPSs through strong chemical interactions. In addition, the introduction of oxygen vacancies provided more active sites for LiPSs, which improved the electron conduction rate and accelerated the ion transport. Based on the above advantages, the battery with an OV-NiCo2O4 modified separator showed excellent electrochemical performance (the initial capacity of the battery was 801 mA h g−1 at 0.5 C, the specific capacity of discharge was maintained at 695 mA h g−1 after 500 cycles, and the capacity retention rate was as high as 87%).

Graphical abstract: A well-dispersed OV-NiCo2O4 nanosphere modified separator for Li–S batteries

Supplementary files

Article information

Article type
Paper
Submitted
17 Aug 2023
Accepted
16 Oct 2023
First published
16 Oct 2023

Dalton Trans., 2023,52, 16513-16518

A well-dispersed OV-NiCo2O4 nanosphere modified separator for Li–S batteries

Y. Gao, S. Liu, J. Zhang, X. Chen, B. Han, Y. Wang, J. Guo, Z. Jin, J. Li and X. Meng, Dalton Trans., 2023, 52, 16513 DOI: 10.1039/D3DT02683C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements