Issue 28, 2023

Palmitic acid/expanded graphite/CuS composite phase change materials toward efficient thermal storage and photothermal conversion

Abstract

In this study, an expanded graphite (EG) with nano-CuS (EG/CuS) support material with a special morphology was prepared, with EG/CuS filled with different ratios of palmitic acid (PA). Finally, a PA/EG/CuS composite phase change thermal storage material with photothermal conversion performance was synthesized. The superb chemical and thermal stability of PA/EG/CuS was demonstrated by characterization and analysis of the experiments. EG, a multi-layer structured material, provides rich binding sites for PA and nano-CuS and constructs rich thermal conductivity paths, which effectively improves the thermal conductivity of PA/EG/CuS. It is noted that the maximum thermal conductivity of PA/EG/CuS reached 0.372 W m−1 K−1 and the maximum phase change thermal storage capacity reached 260.4 kJ kg−1, which proved the excellent thermal storage properties of PA/EG/CuS. In addition, PA/EG/CuS exhibits excellent photothermal conversion performance, and the experimental results demonstrated that the best photothermal conversion efficiency of PA/EG/CuS reached 81.4%. The PA/EG/CuS developed in this study provides a promising method for fabricating excellent conductive and low leakage composite phase change materials for solar energy utilization and energy storage.

Graphical abstract: Palmitic acid/expanded graphite/CuS composite phase change materials toward efficient thermal storage and photothermal conversion

Article information

Article type
Paper
Submitted
22 May 2023
Accepted
18 Jun 2023
First published
23 Jun 2023

Dalton Trans., 2023,52, 9797-9808

Palmitic acid/expanded graphite/CuS composite phase change materials toward efficient thermal storage and photothermal conversion

Y. Huo, T. Yan, Z. Li, S. Li and W. Pan, Dalton Trans., 2023, 52, 9797 DOI: 10.1039/D3DT01539D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements