Issue 43, 2023

Designing dual-emission phosphors for temperature warning indication and dual-mode luminescence thermometry

Abstract

Color tunable phosphors of Mn4+ and Tb3+ co-doped double-perovskite SrGdLiTeO6 (SGLT) were synthesized in this work. The crystal parameters and photoluminescence performances were investigated in detail. By taking advantage of the different thermal quenching strengths between Mn4+ and Tb3+ ions, the emission color of SGLT:0.7%Mn4+/1%Tb3+ changed from red to green, which could be used for high-temperature temperature warning indication. Moreover, according to the luminescence intensity ratio (LIR) technique, wide temperature-range optical thermometry was developed and further, the maximum relative sensitivity (SR1) value of the SGLT:0.7%Mn4+/5%Tb3+ phosphor was determined to be 1.49% K−1 at 560 K. On the other hand, the sensing properties were also analyzed based on the temperature-dependent lifetime method. The most interesting thing is that the maximum SR2 value reached 1.88% K−1 at 573 K. This work proved that the Mn4+ and Tb3+ co-doped double-perovskite SrGdLiTeO6 could be potentially used in temperature warning indication and high sensitivity luminescence thermometry.

Graphical abstract: Designing dual-emission phosphors for temperature warning indication and dual-mode luminescence thermometry

Supplementary files

Article information

Article type
Paper
Submitted
22 May 2023
Accepted
10 Sep 2023
First published
26 Sep 2023

Dalton Trans., 2023,52, 15798-15806

Designing dual-emission phosphors for temperature warning indication and dual-mode luminescence thermometry

L. Li, X. Li, Z. Wu, Y. Hua, X. Zhou, Y. Wang, Z. Cao, S. Jiang, G. Xiang and J. S. Yu, Dalton Trans., 2023, 52, 15798 DOI: 10.1039/D3DT01525D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements