Issue 17, 2023

Splicing oxygen-rich multidentate ligands and characteristic metals to construct flame colorants: abundant structures and attractive colors

Abstract

Tetranitroethane (TNE), an energetic compound with high-nitrogen (N%, 26.7%) and oxygen (O%, 60.9%) content, is deprotonated by alkali and alkaline earth metal bases to form the corresponding metal salts of TNE which are characterized by FT-IR spectroscopy, elemental analysis, and single crystal X-ray diffraction. All the prepared energetic metal salts show excellent thermal stabilities, and the decomposition temperatures of EP-3, EP-4, and EP-5 are higher than 250 °C, due to the numerous coordination bonds of the complexes. Furthermore, the energy of formation of the nitrogen-rich salts were calculated utilizing heat of combustion. The detonation performances were calculated with the EXPLO5 software, and the impact and friction sensitivities were determined. EP-7 shows excellent energy performance (P = 30.0 GPa, VD = 8436 m s−1). EP-3, EP-4, EP-5, and EP-8 are more sensitive to mechanical stimulation. These alkali and alkaline earth metal salts of TNE show good monochromaticity by atomic emission spectroscopy (visible light), and may be used as potential flame colorants in pyrotechnics.

Graphical abstract: Splicing oxygen-rich multidentate ligands and characteristic metals to construct flame colorants: abundant structures and attractive colors

Supplementary files

Article information

Article type
Paper
Submitted
14 Feb 2023
Accepted
20 Mar 2023
First published
21 Mar 2023

Dalton Trans., 2023,52, 5632-5641

Splicing oxygen-rich multidentate ligands and characteristic metals to construct flame colorants: abundant structures and attractive colors

W. Dong, H. Mei, J. Yang, W. Cao, Y. Hu and J. Zhang, Dalton Trans., 2023, 52, 5632 DOI: 10.1039/D3DT00470H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements