Issue 32, 2022, Issue in Progress

Enhanced dielectric properties of polystyrene by using graphene incorporated styrene-butyl acrylate microspheres

Abstract

In view of the current trend of capacitor materials, the development of capacitors with high dielectric permittivity and low dielectric loss is of great interest. In this work, the dielectric permittivity of reduced graphene oxide-incorporated styrene-butyl acrylate (rGO@SBA) composite microspheres synthesized by mini-emulsion polymerization was significantly improved. rGO with 2 wt% content gave a dielectric permittivity of 11 356 (at 1 KHz), which was 1925 times higher than that of pure SBA (5.9). SEM and TEM were conducted to observe the morphology and structure of the composite microspheres. After filling into polystyrene (PS), a segregated structure of (rGO@SBA) that enables a concentrated aggregation of rGO in SBA was fabricated. The dielectric permittivity of PS could reach 10.91 (at 1 KHz) by incorporating only 0.39 wt% rGO by using this segregated structure of (rGO@SBA). PS simply mixed with SBA microspheres and graphite (PS/rGO-SBA) was also fabricated as a comparison group to verify the effect of this segregated structure on the dielectric properties of the composites. After comparing the dielectric properties of PS composites with different structures, the enhancement in dielectric permittivity of the composites can be demonstrated.

Graphical abstract: Enhanced dielectric properties of polystyrene by using graphene incorporated styrene-butyl acrylate microspheres

Article information

Article type
Paper
Submitted
02 Jun 2022
Accepted
06 Jul 2022
First published
15 Jul 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 20454-20460

Enhanced dielectric properties of polystyrene by using graphene incorporated styrene-butyl acrylate microspheres

Z. Zhang, G. Tang, F. You, X. Jiang, C. Yao, R. Hu, J. Yao and P. Zhao, RSC Adv., 2022, 12, 20454 DOI: 10.1039/D2RA03427A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements