Issue 16, 2022

Nitrogen-doped graphene quantum dots coated with molecularly imprinted polymers as a fluorescent sensor for selective determination of warfarin

Abstract

Water-soluble and eco-friendly nitrogen-doped graphene quantum dots (NGQDs) were synthesized via a hydrothermal method. Subsequently, a novel optical sensor based on NGQDs coated with molecularly imprinted polymers (NGQDs@MIPs) was prepared via sol–gel polymerization. The synthesized polymers were characterized by transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The NGQDs@MIPs sensor showed specific selectivity and superior detection performance for warfarin which is a common anticoagulant rodenticide in environmental samples. The fluorescence intensity of the NGQDs@MIPs sensor presented an excellent linear response with warfarin concentrations ranging from 0.63 μM to 10 μM with a 0.16 μM detection limit. The recovery of warfarin from spiked environmental samples varied from 94.38% to 105.84%, with a relative standard deviation of less than 5.0%. Therefore, the NGQDs@MIPs sensor with a selective response and remarkable anti-interference performance may be a feasible method for the rapid detection of warfarin in environmental samples.

Graphical abstract: Nitrogen-doped graphene quantum dots coated with molecularly imprinted polymers as a fluorescent sensor for selective determination of warfarin

Supplementary files

Article information

Article type
Paper
Submitted
19 Feb 2022
Accepted
16 Mar 2022
First published
01 Apr 2022

New J. Chem., 2022,46, 7537-7544

Nitrogen-doped graphene quantum dots coated with molecularly imprinted polymers as a fluorescent sensor for selective determination of warfarin

P. Li, Y. Du, M. Ma and J. Zhang, New J. Chem., 2022, 46, 7537 DOI: 10.1039/D2NJ00853J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements