Issue 8, 2022

A planar ultraviolet objective lens for optical axis free imaging nanolithography by employing optical negative refraction

Abstract

Lithography is one of the most key technologies for integrated circuit (IC) manufacturing and micro/nano-functional device fabrication, while the imaging objective lens plays one important role. Due to the curved surface of the conventional objective lens, the imaging field of view is limited and the objective lens system is complex. In this paper, a planar objective lens based on the optical negative refraction principle is demonstrated for achieving optical axis free and long depth of focus imaging nanolithography. Through employing a hyperbolic metamaterial composed of silver/titanium dioxide multilayers, plasmonic waveguide modes could be generated in multilayers, which results in optical negative refraction and then flat imaging at ultraviolet wavelength. The corresponding imaging characteristics are investigated in simulation and experiment. At the I-line wavelength of 365 nm, the highest imaging resolution of 165 nm could be realized in the 100 nm photoresist layer under the working gap of 100 nm between the objective lens and substrate. Moreover, this planar objective lens has good ability for cross-scale and two-dimensional imaging lithography, and is similar to a conventional projection objective lens. It is believed that this kind of planar objective lens will provide a promising avenue for low-cost nanofabrication scenarios in the near future.

Graphical abstract: A planar ultraviolet objective lens for optical axis free imaging nanolithography by employing optical negative refraction

Supplementary files

Article information

Article type
Paper
Submitted
23 Dec 2021
Accepted
07 Mar 2022
First published
08 Mar 2022
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2022,4, 2011-2017

A planar ultraviolet objective lens for optical axis free imaging nanolithography by employing optical negative refraction

W. Kong, L. Liu, C. Wang, M. Pu, P. Gao, K. Liu, Y. Luo, Q. Jin, C. Zhao and X. Luo, Nanoscale Adv., 2022, 4, 2011 DOI: 10.1039/D1NA00883H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements