Solvent engineering to regulate the phase of copper zinc tin sulfide nanocrystals

Abstract

Copper zinc tin sulfide (Cu₂ZnSnS₄, CZTS) is attracting interest in photovoltaic applications due to its proper band gap, low cost and low toxicity. It has been found that two phases can be fabricated, i.e. kesterite and wurtzite CZTS structures. Though kesterite CZTS is proven to be thermodynamically stable, the free energy difference between kesterite and wurtzite CZTS is rather small. So, wurtzite CZTS can also stably exist under ambient conditions. Controlling the phase formation can expand the dimensions to optimize the performance of applications based on CZTS. In this study, we found that phase control can be achieved by simply using a mixed solvent of ethylene glycol and triethylenetetramine (TETA) in a two-stage heating process. It is found that the incorporation of the reductive solvent of TETA during the 1st heating process converts the phase of the precipitates from CuS (TETA poor) to Cu₇S₄ (TETA rich). In the subsequent 2nd heating stage, the phase of the final products is determined to be kesterite CZTS originating from CuS and wurtzite CZTS from Cu₇S₄, respectively. Thus, the key to control the phases of the final products is to control the chemical environment of Cu under Cu¹⁺-rich or Cu²⁺-rich conditions in the fabrication process, which corresponds to the phase of the final products of wurtzite CZTS or kesterite CZTS, respectively. This summarized principle can not only be used to explain the previous versatile experimental results but also to guide the controlled synthesis of various phases of CZTS and CZTS-like materials in applications.