Issue 40, 2022

Prism-like bimetallic (Ni–Co) alkaline carboxylate-based non-enzymatic sensor capable of exceptionally high catalytic activity towards glucose

Abstract

In this study, we fabricated a novel non-enzymatic glucose sensor based on prism-like bimetallic alkaline carboxylate (CoNi–MIM). The morphology and structure of CoNi–MIM were carefully investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The electrochemical glucose oxidation of the synthesized sensor was then explored by cyclic voltammetry (CV) and chronoamperometry in alkaline medium. It was found that CoNi–MIM is the optimal choice with a remarkably high sensitivity of 5024.4 μA mM−1 cm−2, low detection limit of 56.1 nM (S/N = 3), linear response of up to 14.3 mM and excellent selectivity compared to Co-MIM, CoFe-MIM and CoMn-MIM. Furthermore, the as-fabricated sensor demonstrated appreciable practicality for the determination of glucose in real samples. These results indicate that CoNi–MIM holds a good application prospect in non-enzymatic glucose sensing.

Graphical abstract: Prism-like bimetallic (Ni–Co) alkaline carboxylate-based non-enzymatic sensor capable of exceptionally high catalytic activity towards glucose

Supplementary files

Article information

Article type
Paper
Submitted
26 Jul 2022
Accepted
12 Sep 2022
First published
13 Sep 2022

Dalton Trans., 2022,51, 15354-15360

Prism-like bimetallic (Ni–Co) alkaline carboxylate-based non-enzymatic sensor capable of exceptionally high catalytic activity towards glucose

D. Chu, Y. Wang, D. Li, X. Chu, D. Ge and X. Chen, Dalton Trans., 2022, 51, 15354 DOI: 10.1039/D2DT02424A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements