Issue 10, 2021, Issue in Progress

Biohydrogen production from traditional Chinese medicine wastewater in anaerobic packed bed reactor system

Abstract

Three anaerobic packed bed reactors (APBR) packed with activated carbon, maifanite and tourmaline as support material were continuously operated for 165 days to generate hydrogen from traditional Chinese medicine wastewater at different organic loading rates (OLR) from 15.2 to 91.3 g COD L−1 d−1 by changes of hydraulic retention time (HRT) varying from 24 to 6 h. The best performance with hydrogen production rate (HPR) of 7.92 ± 0.27 mmol L−1 h−1 and hydrogen yield (HY) of 3.50 ± 0.09 mmol g−1 COD was achieved for the reactor with tourmaline at OLR of 60.8 g COD L−1 d−1 (HRT = 6 h), followed by activated carbon and maifanite. The main metabolic products for each reactor were found to be acetate and butyrate in the effluent with pH range of 5.6–6.4 and microbial analysis revealed that the dominant communities in all cultures were C. carboxidivoran and C. butyricum, responsible for acetate and butyrate production respectively.

Graphical abstract: Biohydrogen production from traditional Chinese medicine wastewater in anaerobic packed bed reactor system

Article information

Article type
Paper
Submitted
01 Nov 2020
Accepted
20 Jan 2021
First published
01 Feb 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 5601-5608

Biohydrogen production from traditional Chinese medicine wastewater in anaerobic packed bed reactor system

C. Sun, T. Sheng, L. Li and L. Yang, RSC Adv., 2021, 11, 5601 DOI: 10.1039/D0RA09290H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements