Issue 21, 2021

A β-cyclodextrin enhanced polyethylene terephthalate film with improved contact charging ability in a high humidity environment

Abstract

Moisture in the environment can severely decrease the contact charging properties of polymers, which usually reduce the output of solid–solid triboelectric nanogenerators (TENGs), hindering their further practical applications. To solve this problem, in this paper we fabricated a new type of polyethylene terephthalate (PET) based TENG, which can work stably in a high humidity environment with high output performance. The surface of the PET film is modified with β-cyclodextrin to introduce hydroxyl groups, which increase the ability to form hydrogen bonds with water molecules in a high humidity environment, immobilizing water molecules to participate in contact charging. Since water molecules are a more positive material, the PET film combined with water molecules will acquire more positive charges during the contact charging process, which will greatly increase the electrical output of PET-based TENGs. Different from the PET film-based TENG without hydroxyl on the surface, the electrical output of the β-cyclodextrin-modified PET-based TENG increases with the increase of environmental humidity. The circuit current (Isc) of the TENG increases from 3.7 μA to 16 μA when the humidity increases from 15% to 95%. Moreover, the dielectric properties of the PET film increase due to the introduction of amino groups in β-cyclodextrin, which causes the Isc of the TENG to increase by 3.7 times at 15% RH. This strategy highly expands the application scope of TENGs for energy harvesting and self-powered sensors in high humidity environments, especially in cloudy and foggy days or under water and sweat conditions.

Graphical abstract: A β-cyclodextrin enhanced polyethylene terephthalate film with improved contact charging ability in a high humidity environment

Supplementary files

Article information

Article type
Paper
Submitted
11 May 2021
Accepted
24 Aug 2021
First published
01 Sep 2021
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2021,3, 6063-6073

A β-cyclodextrin enhanced polyethylene terephthalate film with improved contact charging ability in a high humidity environment

N. Wang, Y. Liu, Y. Wu, Z. Li and D. Wang, Nanoscale Adv., 2021, 3, 6063 DOI: 10.1039/D1NA00341K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements