Issue 36, 2021

Cd1−xMgxS CQD thin films for high performance and highly selective NIR photodetection

Abstract

Development of high-performance and highly selective NIR photodetectors (PDs) using wide band gap semiconductors is a significant field of research in the present scenario. Herein, cost effective and easy fabrication of NIR PDs is demonstrated by employing the thin films of Cd1−xMgxS (x = 0, 0.01, 0.02, 0.03, 0.04 and 0.05) colloidal quantum dots (CQDs). The influence of doping on the transport behaviour of Cd1−xMgxS CQD films was investigated by device performance under laser light illumination at various wavelengths ranging from 405 nm to 782 nm. An improvement in the photoresponsivity of the material (CdS) beyond its intrinsic absorption spectral range due to the incorporation of the dopant is noticed. In spite of the cost effective and easy fabrication process without the requirement of any rigorous synthesis procedure, the devices presented here demonstrate competitive figures of merit to those that are designed with complex structures and tedious procedures. The performance parameters viz response time, responsivity, photosensitivity, quantum efficiency, and specific detectivity were improved as a consequence of Mg doping and attained a maximum value of 110 ms, ∼26.9 A W−1, ∼4.7 × 104%, ∼41.23% and ∼3.45 × 1013 Jones, respectively. Besides, the sensing range of the PDs can be tuned from visible (650 nm) to NIR (782 nm) with a huge improvement in selectivity by incorporation of Mg.

Graphical abstract: Cd1−xMgxS CQD thin films for high performance and highly selective NIR photodetection

Supplementary files

Article information

Article type
Paper
Submitted
12 May 2021
Accepted
06 Aug 2021
First published
06 Aug 2021

Dalton Trans., 2021,50, 12708-12715

Cd1−xMgxS CQD thin films for high performance and highly selective NIR photodetection

T. Kalsi and P. Kumar, Dalton Trans., 2021, 50, 12708 DOI: 10.1039/D1DT01547H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements