Issue 35, 2020

Self-supported N-doped CNT arrays for flexible Zn–air batteries

Abstract

The exploitation of flexible and rechargeable energy storage devices is crucial for meeting the requirements of the next generation of electronic products. Herein, we report a novel method to grow N-doped carbon nanotube (NCNT) arrays with encapsulated CoFe alloy nanoparticles on carbon fiber cloth (CFC) as a self-supported air cathode for flexible ZABs. The optimized electrode exhibits superior bifunctional activities with a half-wave potential of 0.873 V for the oxygen reduction reaction (ORR) and a potential of 1.506 V for the oxygen evolution reaction (OER) at 10 mA cm−2, greatly superior to that of 20% Pt/C for the ORR and IrO2 for the OER, respectively. The experimental results demonstrate that the atomically dispersed Co(Fe) dual-sites formed in the NCNT walls are key to the excellent activities of the self-supported electrode. When the self-supported electrode is applied as an air cathode for flexible solid-state ZABs, a large open-circuit voltage of 1.426 V, a high initial energy efficiency of 69% and a large power density of 37.7 mW cm−2 as well as robust stability are achieved. Furthermore, the solid-state ZABs with the self-supported electrode exhibit excellent flexibility even under extreme bending conditions. Our strategy presented here opens a new way for bifunctional catalysts for high-performance flexible ZABs.

Graphical abstract: Self-supported N-doped CNT arrays for flexible Zn–air batteries

Supplementary files

Article information

Article type
Paper
Submitted
01 Jun 2020
Accepted
05 Aug 2020
First published
06 Aug 2020

J. Mater. Chem. A, 2020,8, 18162-18172

Self-supported N-doped CNT arrays for flexible Zn–air batteries

L. Liu, X. Zhang, F. Yan, B. Geng, C. Zhu and Y. Chen, J. Mater. Chem. A, 2020, 8, 18162 DOI: 10.1039/D0TA05510G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements