Issue 32, 2020

A novel design of an electrolyser using a trifunctional (HER/OER/ORR) electrocatalyst for decoupled H2/O2 generation and solar to hydrogen conversion

Abstract

Nowadays, a variety of multifunctional electrocatalysts are being developed while there is still a lack of suitable design to fully realize their multifunctionalities. Here, we propose a general, simple, two-component design of an electrolyser to replace the traditional three-component design for decoupled water splitting. Trifunctional (OER, HER and ORR) electrocatalysts (such as nickel sulfide foams with surface grown N-doped carbon nanotube arrays) are used as the gas evolution electrode to replace both the cathode and the anode, while materials with suitable redox activities (NaTi2(PO4)3 or commercial Ni(OH)2) are used as the relay electrode. In such a design, the H2/O2 evolution can be switched by reversing the current polarity, and the ORR before the HER consumes the residual O2 left in the electrolyser, guaranteeing the high purity (∼99.9%) of the as-obtained H2. With NaTi2(PO4)3 as the relay electrode and the nickel sulfide foam as the gas evolution electrode, owing to the high decoupling efficiency of the NaTi2(PO4)3 relay (97%) and the low HER/OER overpotentials of the trifunctional nickel sulfide foam, an energy conversion efficiency of up to 94.3% can be obtained for the as-assembled electrolyser at a current density of 10 mA cm−2. When combined with a commercial Si PV module with an efficiency of 14.4%, the as-designed PV-electrolysis system showed a solar-to-hydrogen conversion efficiency of up to 10.4%. Utilization of trifunctional electrocatalysts greatly reduces the complexity of the electrolyser and the overall cost for electrochemical H2 production, and these electrolysers may potentially be used to construct highly competitive water splitting systems for continuous H2 production and green energy harvesting. Our research may also bring new insights into the utilization of multifunctional electrocatalysts in other devices, such as metal–air batteries and fuel cells.

Graphical abstract: A novel design of an electrolyser using a trifunctional (HER/OER/ORR) electrocatalyst for decoupled H2/O2 generation and solar to hydrogen conversion

Supplementary files

Article information

Article type
Paper
Submitted
19 May 2020
Accepted
18 Jul 2020
First published
20 Jul 2020

J. Mater. Chem. A, 2020,8, 16609-16615

A novel design of an electrolyser using a trifunctional (HER/OER/ORR) electrocatalyst for decoupled H2/O2 generation and solar to hydrogen conversion

M. Guo, L. Wang, J. Zhan, X. Jiao, D. Chen and T. Wang, J. Mater. Chem. A, 2020, 8, 16609 DOI: 10.1039/D0TA05102K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements