Issue 68, 2020

Patterned waveguide liquid crystal displays

Abstract

We report a novel polymer stabilized liquid crystal based light waveguide display whose performance is significantly improved by using patterned photo-polymerization or an electrode. The waveguide display is edge-lit and operates on the light scattering of the polymer stabilized liquid crystal. When no voltage is applied, the liquid crystal is uniformly aligned and is transparent. The incident light is waveguided through the display by total internal reflection and no light comes out of the viewing side of the display. When a voltage is applied, the liquid crystal is switched to a micron-sized poly-domain structure and becomes scattering. The incident light is scattered out of the viewing side of the display. We demonstrated that by using patterned photo-polymerization or an ITO electrode, the scattering efficiency of the liquid crystal in the voltage-on state is significantly enhanced. We have achieved high brightness, low driving voltage, sub-millisecond switching time and high contrast ratio. This new display is suitable for transparent and augmented display applications.

Graphical abstract: Patterned waveguide liquid crystal displays

Article information

Article type
Paper
Submitted
14 Aug 2020
Accepted
27 Oct 2020
First published
13 Nov 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 41693-41702

Patterned waveguide liquid crystal displays

Y. Shin, J. Jiang, G. Qin, Q. Wang, Z. Zhou and D. Yang, RSC Adv., 2020, 10, 41693 DOI: 10.1039/D0RA07016E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements