Nanocellulose–organic montmorillonite nanocomposite adsorbent for diuron removal from aqueous solution: optimization using response surface methodology

Abstract

Herbicides have been ubiquitous in water environments in recent years, and so it is an appealing proposition to develop an efficient adsorbent for the adsorption of diuron. Therefore, the present study investigated a cellulose nanocrystal/organic montmorillonite nanocomposite adsorbent (CNC/CTM) and its adsorption properties towards diuron present in water. The structure and characteristics of the adsorbent used in this study were characterized by various characterization methods. The optimal diuron adsorption conditions for the CNC/CTM nanocomposite were analyzed based on the response surface methodology (RSM). The adsorption isotherms and kinetics of diuron adsorption were investigated. The results indicated that the adsorption process is the result of hydrogen bonding and the hydrophobicity of the alkyl chain. Under the optimal adsorption conditions, 0.07 g L⁻¹ CNC/CTM adsorbed 5.86 mg L⁻¹ diuron in less than 318.68 min and an efficiency of 82.32% could be achieved. The simulation results showed that the adsorption capacity of CNC/CTM for diuron removal followed the Sips model most closely. The maximum adsorption capacity was approximately 69.04 mg g⁻¹ at 288 K. The experimental data was described best by a pseudo-second-order kinetic equation, signifying a chemical adsorption process. The adsorbent can be reused at least five times after simple solvent washing. This study provides a theoretical basis for understanding the adsorption process of diuron present in water.