Issue 32, 2020, Issue in Progress

Shampoo assisted aligning of carbon nanotubes toward strong, stiff and conductive fibers

Abstract

High alignment and densification of carbon nanotubes (CNTs) are of key importance for strengthening CNT fibers, whereas direct stretching has a very limited effect when CNTs are highly entangled. We report that by lubricating CNT surfaces with viscous alcohols, the relative motion between CNTs improves because of the reduced sliding energy barrier; thus non-stretched regions are effectively eliminated. Owing to the very efficient optimization of the assembled structure, the stretched CNT fibers exhibited an average tensile strength of 2.33 GPa (1.82 N per tex) and modulus of 70.1 GPa (54.8 N per tex). Other fundamental properties, such as electrical and thermal conductivities, were also remarkably improved. Such a strategy can be readily used for manufacturing high-performance CNT assemblies and composites.

Graphical abstract: Shampoo assisted aligning of carbon nanotubes toward strong, stiff and conductive fibers

Article information

Article type
Paper
Submitted
23 Mar 2020
Accepted
11 May 2020
First published
18 May 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 18715-18720

Shampoo assisted aligning of carbon nanotubes toward strong, stiff and conductive fibers

J. Wang, J. Zhao, L. Qiu, F. Li, C. Xu, K. Wu, P. Wang, X. Zhang and Q. Li, RSC Adv., 2020, 10, 18715 DOI: 10.1039/D0RA02675A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements