Issue 16, 2020, Issue in Progress

An electroless-plating-like solution approach for the preparation of PS@TiO2@Ag core–shell spheres

Abstract

PS@TiO2@Ag spheres with triple-level core–shell nanostructures were prepared via a versatile coating procedure based on an electroless-plating-like solution deposition (EPLSD) method. A peroxo-titanium-complex (PTC) aqueous solution was used as the precursor to react with an aniline monomer in the EPLSD preparation. Aniline plays an important role in the TiO2 layer anchoring process through the swollen effects of the PS cores. As extended, peroxo-metal-complex (PMC) with the d0 configuration can be introduced onto PS spheres to form varieties of PS@metal oxide core–shell structures by this method under mild conditions. Ag layers were then modified onto the PS@TiO2 spheres via the photocatalytic method. By the extraction of the PS cores, hollow TiO2 and TiO2@Ag spheres could be obtained. The photochemical degradation of methylene blue (MB) under UV light irradiation was performed on the composite nanostructures.

Graphical abstract: An electroless-plating-like solution approach for the preparation of PS@TiO2@Ag core–shell spheres

Article information

Article type
Paper
Submitted
17 Dec 2019
Accepted
17 Feb 2020
First published
04 Mar 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 9341-9346

An electroless-plating-like solution approach for the preparation of PS@TiO2@Ag core–shell spheres

C. Wang, D. Ma, X. Li, D. Luo and L. Wu, RSC Adv., 2020, 10, 9341 DOI: 10.1039/C9RA10624C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements