Issue 6, 2020

GexSi1−x virtual-layer enhanced ferromagnetism in self-assembled Mn0.06Ge0.94 quantum dots grown on Si wafers by molecular beam epitaxy

Abstract

Self-assembled Mn0.06Ge0.94 quantum dots (QDs) on a Si substrate or GexSi1−x virtual substrate (VS) were grown by molecular beam epitaxy. The GexSi1−x VS of different thicknesses and Ge compositions x were utilized to modulate the ferromagnetic properties of the above QDs. The MnGe QDs on GexSi1−x VS show a significantly enhanced ferromagnetism with a Curie temperature above 220 K. On the basis of the microstructural and magnetization results, the ferromagnetic properties of the QDs on GexSi1−x VS are believed to come from the intrinsic MnGe ferromagnetic phase rather than any intermetallic ferromagnetic compounds of Mn and Ge. At the same time, we found that by increasing the Ge composition x of GexSi1−x VS, the ferromagnetism of QDs grown on VS will markedly increase due to the improvements of hole concentration and Ge composition inside the QDs. These results are fundamentally important in the understanding and especially in the realization of high Curie temperature MnGe diluted magnetic semiconductors.

Graphical abstract: GexSi1−x virtual-layer enhanced ferromagnetism in self-assembled Mn0.06Ge0.94 quantum dots grown on Si wafers by molecular beam epitaxy

Article information

Article type
Paper
Submitted
01 Nov 2019
Accepted
27 Dec 2019
First published
02 Jan 2020

Nanoscale, 2020,12, 3997-4004

GexSi1−x virtual-layer enhanced ferromagnetism in self-assembled Mn0.06Ge0.94 quantum dots grown on Si wafers by molecular beam epitaxy

L. Wang, Y. Zhang, T. Liu, Z. Zhang, H. Hu, J. Zou, Q. Jia and Z. Jiang, Nanoscale, 2020, 12, 3997 DOI: 10.1039/C9NR09315J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements