Jump to main content
Jump to site search

Tunable Adhesion and Slip on a Bio-mimetic Sticky Soft Surface


Simultaneous tuning of wettability and adhesion of a surface requires intricate procedures for altering the interfacial structures. Here, we present a simple method of preparing a stable slippery surface, with an intrinsic capability of varying its adhesion characteristics. Cross-linked PDMS, an inherent hydrophobic material commonly used for microfluidic applications, is used to replicate the structures on the surface of a rose petals which acts as the high adhesion solid base and is subsequently oleoplaned with silicone oil. Our results demonstrate that the complex hierarchical rose petal structures can arrest dewetting of the silicone oil on the cross linked PDMS base by anchoring the oil film strongly even under flow. Further, by tuning the extent of submergence of the rose petal structures with silicone oil, we could alter the adhesion characteristics of the surface on demand, while retaining its slippery characteristics for a wide range of the pertinent parameters. We have also demonstrated the possible fabrication of gradient adhesion surfaces. This, in turn, may find a wide variety of applications in water harvesting, droplet maneuverability and no lost transportation in resource-limited settings.

Back to tab navigation

Supplementary files

Publication details

The article was received on 19 Aug 2019, accepted on 07 Oct 2019 and first published on 08 Oct 2019

Article type: Paper
DOI: 10.1039/C9SM01680E
Soft Matter, 2019, Accepted Manuscript

  •   Request permissions

    Tunable Adhesion and Slip on a Bio-mimetic Sticky Soft Surface

    S. Bandyopadhyay, S. M. Sriram, V. Parihar, S. DasGupta, R. Mukherjee and S. Chakraborty, Soft Matter, 2019, Accepted Manuscript , DOI: 10.1039/C9SM01680E

Search articles by author