Issue 55, 2019

Computational fluid dynamics simulation as a tool for optimizing the hydrodynamic performance of membrane bioreactors

Abstract

The hydrodynamic properties and shear stresses experienced by a membrane bioreactor (MBR) are directly related to its rate of membrane fouling. In this study, computational fluid dynamic models have been combined with cold model PIV experimental studies to optimize the performance properties of MBRs. The effects of membrane module height, number of aeration tubes and membrane spacing on liquid phase flow rates, gas holdup and shear stresses at the membrane surface have been investigated. It has been found that optimal MBRs experience the greatest shear forces on their surfaces at a distance of 250 mm from the aeration tube, around the 7 aeration tubes used to introduce gas and at the 40 mm spacings between the membrane sheets. Use of an aeration intensity of between 0.02 and 0.47 m3 minβˆ’1 generated shear stresses that were 50–85% higher than the original MBR for the same aeration intensity, thus affording optimal membrane performance that minimizes membrane fouling.

Graphical abstract: Computational fluid dynamics simulation as a tool for optimizing the hydrodynamic performance of membrane bioreactors

Article information

Article type
Paper
Submitted
26 Aug 2019
Accepted
01 Oct 2019
First published
09 Oct 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 32034-32046

Computational fluid dynamics simulation as a tool for optimizing the hydrodynamic performance of membrane bioreactors

Y. Jin, C. Liu, X. Song and J. Yu, RSC Adv., 2019, 9, 32034 DOI: 10.1039/C9RA06706J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements