Issue 44, 2019, Issue in Progress

Effects of chain extender on properties and foaming behavior of polypropylene foam

Abstract

Polypropylene (PP) foam offers superior thermal and mechanical properties and versatile applications. However, the linear structure of PP hinders the fabrication of a uniform and fine foam, owing to changes in the melt strength with variations in the temperature. The foamability of the material can be improved by fabricating modified PP by introducing long-chain branches by grafting and chain extension reactions, using glycidyl methacrylate (GMA) and adipic acid (AA). Adding 5 phr GMA to PP optimizes the graft ratio. AA as a chain extender forms a long-chain branched structure, as confirmed by the melt flow index, morphology, and thermal and dynamic viscoelastic properties. Variations in foaming characteristics according to the AA content, temperature, volume expansion ratio, and oven residence time have also been observed. An optimal volume expansion ratio of ∼14 is obtained at an AA content of 1.5 phr and foaming for 11 min at 240 °C.

Graphical abstract: Effects of chain extender on properties and foaming behavior of polypropylene foam

Supplementary files

Article information

Article type
Paper
Submitted
26 Jun 2019
Accepted
07 Aug 2019
First published
15 Aug 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 25496-25507

Effects of chain extender on properties and foaming behavior of polypropylene foam

D. Y. Kim, J. H. Cha and K. H. Seo, RSC Adv., 2019, 9, 25496 DOI: 10.1039/C9RA04824C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements