Issue 26, 2019, Issue in Progress

Effect of polymer molecular weight on J51 based organic solar cells

Abstract

Very recently, organic solar cells (OSCs) have achieved outstanding scientific results with a power conversion efficiency (PCE) of over 16%. However, it is rarely reported on how molecular weight (Mn) of polymer donors affects the solar cell performances. In this work, the wide bandgap polymer donor J51 with different Mn from 8 to 36 kDa were synthesized and used for fabrication of J51:PC71BM devices. It was found that the PCEs were gradually on the increase with the increased molecular weight of J51 donor. This work demonstrated the relationship between devices performance and polymer molecular weight, which enriched the OSCs research content. It provides valuable reference information that optimal molecular weight of polymer donors should be limited in what is considered the applicable range.

Graphical abstract: Effect of polymer molecular weight on J51 based organic solar cells

Article information

Article type
Paper
Submitted
15 Mar 2019
Accepted
02 May 2019
First published
10 May 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 14657-14661

Effect of polymer molecular weight on J51 based organic solar cells

Y. Zhang, X. Xu, J. Lu and S. Zhang, RSC Adv., 2019, 9, 14657 DOI: 10.1039/C9RA02022E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements