Issue 18, 2019, Issue in Progress

Preparation and biocompatibility of Fe50Ni50p/HAP/PEEK biocomposites with weak magnetic properties

Abstract

Hydroxyapatite (HAP)/polyetheretherketone (PEEK) composites are widely used in the new generation of bone implant materials. The use of weak magnetic fields can promote the biocompatibility of PEEK materials. In this paper, Fe50Ni50 alloy nanopowders and Fe50Ni50/HAP/PEEK composites were prepared by liquid phase chemical reduction and liquid phase mixing. The prepared Fe50Ni50 alloy nanopowders have a particle size of about 100 nm and good chemical activity and magnetic properties. The saturation magnetization (Ms) of the Fe50Ni50 alloy powders is 70 emu g−1. Fe50Ni50 nano-powders in Fe50Ni50/HAP/PEEK composites are uniformly distributed in the matrix in the form of individual particles, achieving nano-level dispersion. With the increase of Fe50Ni50 alloy powders content, the magnetic properties of the composites are significantly enhanced. The biocompatibility of Fe50Ni50/HAP/PEEK composites is significantly better than that of PEEK and HAP/PEEK materials. The 2% Fe50Ni50/HAP/PEEK composite has the best comprehensive performance, and its biocompatibility is good. The contact angle is only 55.85°. The Ms reaches 1.5 emu g−1 and the hardness reaches 42 HBa.

Graphical abstract: Preparation and biocompatibility of Fe50Ni50p/HAP/PEEK biocomposites with weak magnetic properties

Article information

Article type
Paper
Submitted
27 Jan 2019
Accepted
13 Mar 2019
First published
29 Mar 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 10081-10090

Preparation and biocompatibility of Fe50Ni50p/HAP/PEEK biocomposites with weak magnetic properties

D. Liu, Z. Zhu, J. Zhou, H. Zhao, J. Chen, R. Bai, Q. Lin and M. Alagarsamy, RSC Adv., 2019, 9, 10081 DOI: 10.1039/C9RA00719A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements