Issue 12, 2019

Electrical and electrochemical properties of Li2M(WO4)2 (M = Ni, Co and Cu) compounds

Abstract

Li2M(WO4)2 (M = Co, Cu or Ni) materials have been synthesized using the solid-state reaction method. X-ray diffraction measurements confirmed the single phase of the synthesized compounds in the triclinic crystal system (space group P[1 with combining macron]). The SEM analyses revealed nearly spherical morphology with the particle size in the range of 1–10 μm. The IR spectra confirm the presence of all modes of WO42−. The impedance spectroscopy measurements showed the presence of grain boundaries and allow determination of the conductivity of the synthesized materials at room temperature. As positive electrode materials for lithium ion batteries, Li2M(WO4)2 (M = Co, Cu or Ni) cathode materials deliver initial discharge capacities of 31, 33 and 30 mA h g−1 for cobalt, nickel, and copper, respectively.

Graphical abstract: Electrical and electrochemical properties of Li2M(WO4)2 (M = Ni, Co and Cu) compounds

Article information

Article type
Paper
Submitted
15 Dec 2018
Accepted
16 Feb 2019
First published
27 Feb 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 6785-6792

Electrical and electrochemical properties of Li2M(WO4)2 (M = Ni, Co and Cu) compounds

K. Karoui, A. Mahmoud, A. Ben Rhaiem and F. Boschini, RSC Adv., 2019, 9, 6785 DOI: 10.1039/C8RA10306B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements