Issue 7, 2019

Self-recoverable Pd–Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation

Abstract

Self-recoverable Pd–Ru/TiO2 nanocatalysts have been prepared by electrochemical stripping of Pd–Ru/TiO2 precursors. For the ethanol oxidation reaction (EOR), these Pd–Ru/TiO2 nanocatalysts are used as an anode catalyst. The characterization of catalysts via chronoamperometry has been repeated 15 times. After 15 stability tests, the Pd1Ru0.69/TiO2 nanocatalysts still achieve a factor of 9.4 enhancement at the residual current density (309.42 mA mgPd−1) for the EOR over commercial Pd/C catalysts (33.01 mA mgPd−1). From the 5th to 15th test, when each 10 000 s stability test is performed in a fresh ethanol electrolyte, the initial and residual current density of the catalysts could recover to the original or even better value in a few hours before performing another 10 000 s stability test. Herein, these Pd–Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation are self-recoverable. Density functional theory calculations reveal that the introduction of oxophilic metal Ru and a TiO2 support into Pd-based catalysts and the synergistic effects between Ru and TiO2 have led to the ultrastability towards the EOR. The introduction of oxophilic metal Ru and a TiO2 support into catalysts can reduce the adsorption energy of OHads on the Pd–Ru/TiO2 nanocatalysts, and it will inhibit the COads produced and adsorbed on the Pd surface.

Graphical abstract: Self-recoverable Pd–Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation

Supplementary files

Article information

Article type
Paper
Submitted
06 Nov 2018
Accepted
20 Jan 2019
First published
22 Jan 2019

Nanoscale, 2019,11, 3311-3317

Self-recoverable Pd–Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation

X. Liu, L. Ning, M. Deng, J. Wu, A. Zhu, Q. Zhang and Q. Liu, Nanoscale, 2019, 11, 3311 DOI: 10.1039/C8NR08935C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements