Issue 7, 2019

Plug-and-play safe-by-design production of metal-doped tellurium nanoparticles with safer antimicrobial activities

Abstract

Safe-by-design principles, such as optimum balance of material function and safety, have received much recent attention. On-demand production is also receiving great interest in the realization of nanotechnologies that meet unpredictable demands of reconfiguration and modification to maximize the efficacy of materials processing. Antimicrobial nanomaterials are representative subjects of these approaches, because they require built-to-order configurations with safe-by-design principles for practical applications. However, few studies have achieved biosafety with original material function using economically feasible production platforms. In this regard, we developed a safe-by-design plug-and-play approach for continuous gas flow production of silver (or copper)-doped tellurium (Ag- or Cu–Te) nanoparticles with safer antimicrobial activity. Using this approach, we achieved precise modulation of dopant contents (5–8% atomic Ag and Cu) in nanoparticles without using batch hydrothermal chemistry. We also suggest the use of ratios between biocompatibility and antimicrobial activity as safety indices (SIs) for evaluations of nanoparticle applications. Approximately 6% atomic Ag in Ag–Te particles exhibited an optimal SI and significantly reduced the minimum inhibitory concentration of individual Te nanoparticles.

Graphical abstract: Plug-and-play safe-by-design production of metal-doped tellurium nanoparticles with safer antimicrobial activities

Supplementary files

Article information

Article type
Paper
Submitted
01 Apr 2019
Accepted
16 May 2019
First published
21 May 2019

Environ. Sci.: Nano, 2019,6, 2074-2083

Plug-and-play safe-by-design production of metal-doped tellurium nanoparticles with safer antimicrobial activities

D. H. Park, M. Gautam, S. J. Park, J. Hwang, C. S. Yong, J. O. Kim and J. H. Byeon, Environ. Sci.: Nano, 2019, 6, 2074 DOI: 10.1039/C9EN00372J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements