Jump to main content
Jump to site search

Issue 39, 2018
Previous Article Next Article

Photo-responsive suspended micro-membranes

Author affiliations

Abstract

Light-responsive devices are becoming increasingly relevant in many applications ranging from soft-robotics, energy harvesting, regenerative medicine and tissue engineering. Here we present a two-photon fabrication process based on a photocurable azopolymeric compound that we successfully employed to manufacture suspended micro-membranes. Thanks to the incorporation of azobenzene units, the membranes are shown to exhibit a remarkable mechanical photo-responsivity despite the disordered, amorphous structure of the crosslinked network. When irradiated with a focused laser beam at 532 nm wavelength, a reversible shape modification is observed, with a linear expansion coefficient as large as 28%. This effect is accompanied by a refractive index decrease of about 0.16, as measured interferometrically. The initial state of the membrane is fully recovered when the irradiation is switched off, as the cyclic photoisomerization process is stopped. The presented approach can be extended to light-induce complex modifications of the mechanical features in 3D printed objects by remotely providing arbitrary illumination patterns.

Graphical abstract: Photo-responsive suspended micro-membranes

Back to tab navigation

Supplementary files

Publication details

The article was received on 03 Aug 2018, accepted on 21 Sep 2018 and first published on 26 Sep 2018


Article type: Communication
DOI: 10.1039/C8TC03877E
Citation: J. Mater. Chem. C, 2018,6, 10428-10434
  •   Request permissions

    Photo-responsive suspended micro-membranes

    E. Descrovi, F. Pirani, V. P. Rajamanickam, S. Licheri and C. Liberale, J. Mater. Chem. C, 2018, 6, 10428
    DOI: 10.1039/C8TC03877E

Search articles by author

Spotlight

Advertisements