Issue 70, 2018

Co-metabolism kinetics and electrogenesis change during cyanide degradation in a microbial fuel cell

Abstract

The co-metabolic degradation kinetics, microbial growth kinetics and electricity generation capacity were researched of strain MC-1 in a MFC (microbial fuel cell). The results show that Haldane and Aiba models suit the growth kinetics of a single substrate (sodium acetate) MFC with 0.995 correlation coefficient. Moreover, the Haldane model was appropriate to describe the growth kinetics of a single substrate (sodium cyanide) MFC with 0.986 correlation coefficient. The growth kinetics of a mixed substrate MFC can be explained well by the SKIP model with correlation coefficient 0.995. Second order and three-half order models were found to suitably describe the cyanide degradation process. The maximum output voltage of MFC and the cyanide degradation efficiency were significantly enhanced by using sodium acetate and cyanide as mixed substrates. Also, the trend of electricity production is related to the growth cycle of microorganisms in a MFC.

Graphical abstract: Co-metabolism kinetics and electrogenesis change during cyanide degradation in a microbial fuel cell

Article information

Article type
Paper
Submitted
23 Oct 2018
Accepted
28 Nov 2018
First published
04 Dec 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 40407-40416

Co-metabolism kinetics and electrogenesis change during cyanide degradation in a microbial fuel cell

H. Wu, Y. Feng, H. Li, H. Wang and J. Wang, RSC Adv., 2018, 8, 40407 DOI: 10.1039/C8RA08775J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements