Issue 16, 2018

Dispersive micro-solid-phase extraction of benzoylurea insecticides in water samples with hyperbranched polyester composite as sorbent

Abstract

A pretreatment method using hyperbranched polyester (HBPE) composite as sorbent based on dispersive micro-solid-phase (d-μ-SPE) extraction preceding high-performance liquid chromatography analysis was developed for the determination of benzoylurea insecticides (BUs) in water samples. Parameters that may influence the extraction efficiency, such as the diameter and the amount of the sorbent, extraction and desorption time and the pH value of the solution, were investigated and optimized using batch and column procedures. Under optimized conditions, good linearity was obtained for all of the tested compounds, with r values of at least 0.9924. The linearity of the method was determined in the range of 1–25 000 μg L−1. The limits of detection (LODs) ranged from 0.024 to 0.068 μg L−1. The recoveries of the four benzoylurea insecticides in water samples increased from 85.50–96.12%. The results confirmed the possibility of using hyperbranched polyester in the determination of relatively hydrophobic trace pesticides residues. Finally, the proposed method was applied to the determination of BUs in water samples with satisfactory results.

Graphical abstract: Dispersive micro-solid-phase extraction of benzoylurea insecticides in water samples with hyperbranched polyester composite as sorbent

Article information

Article type
Paper
Submitted
03 May 2018
Accepted
16 Jul 2018
First published
16 Jul 2018

New J. Chem., 2018,42, 13978-13984

Dispersive micro-solid-phase extraction of benzoylurea insecticides in water samples with hyperbranched polyester composite as sorbent

C. Liu, X. Huang, H. Wang, H. Qian, L. Hu, W. Zhou, R. Lu and H. Gao, New J. Chem., 2018, 42, 13978 DOI: 10.1039/C8NJ02167H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements