Issue 24, 2018

Dielectrophoresis-actuated liquid lenses with dual air/liquid interfaces tuned from biconcave to biconvex

Abstract

This paper reports an electrically reconfigurable optofluidic lens with two air–liquid (silicone oil) interfaces actuated by dielectrophoretic (DEP) force. Initially, a symmetric biconcave air–liquid lens is formed by the surface tension in a microfluidic chip. Then, the DEP force deforms the air–liquid interfaces from biconcave to biconvex, tuning the focal length from −0.5 mm to infinite to +0.5 mm. The wide tunability of the focal length results from the large refractive index difference (∼0.4 at the air–liquid interface), which is only 0.1 in previous liquid–liquid lenses. In the experiment, the lens achieves an ƒ number of 0.91 while consuming only 6.7 nJ per circle. Some asymmetric working states, such as concave–convex and plano-convex lenses, have also been demonstrated. Compared with continuous liquid flow-sustained lenses, this stationary liquid lens holds promise of better compatibility and higher scalability. Its wide tunability, low power consumption and easy operation make it suitable for light manipulation in microfluidic networks.

Graphical abstract: Dielectrophoresis-actuated liquid lenses with dual air/liquid interfaces tuned from biconcave to biconvex

Supplementary files

Article information

Article type
Paper
Submitted
21 Sep 2018
Accepted
02 Nov 2018
First published
05 Nov 2018

Lab Chip, 2018,18, 3849-3854

Dielectrophoresis-actuated liquid lenses with dual air/liquid interfaces tuned from biconcave to biconvex

Q. Chen, T. Li, Z. Li, C. Lu and X. Zhang, Lab Chip, 2018, 18, 3849 DOI: 10.1039/C8LC00999F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements