Issue 12, 2018

Development of sulfide reference materials for in situ platinum group elements and S–Pb isotope analyses by LA-(MC)-ICP-MS

Abstract

The platinum group elements and sulfur-lead isotopes in sulfide minerals are important geochemical tracers in the earth sciences. However, in situ analyses of PGEs and S–Pb isotope compositions in natural sulfides using laser-ablation (multicollector) inductively coupled plasma mass spectrometry (LA-(MC)-ICP-MS) are limited by a lack of suitable sulfide reference materials. A new synthetic method to produce sulfide reference materials was reported in this study. The hydrothermal synthesis technique was used to prepare the initial nano-FeS2 particles. Trace elements were added to the reaction medium and then entered into the lattice of the nano-FeS2 particles during the crystal growth process. The powder-pressed pellets prepared by the nano-FeS2 particles (500–600 nm) exhibited excellent cohesion and were suitable for laser ablation microanalysis. Using this method, we synthesized four sulfide reference materials with different mass fractions of trace elements. Repeated measurements using LA-(MC)-ICP-MS demonstrated good homogeneity for most of the trace elements (RSD <3% for PGEs, Au and Pb) and S isotope compositions (<0.23‰, 2SD) in the four sulfide reference materials, and Pb isotope compositions in two of these materials (<0.06% and <0.17%, 2RSD). Four sulfide reference materials were used as external standards to certify two commercial sulfide standards, MASS-1 and STDGL3#35. Accurate results from the analysis for trace elements were obtained, indicating that the synthesized sulfide reference materials are appropriate matrix-matched materials available for calibration in sulfides using LA-ICP-MS. The results also indicated that the hydrothermal synthesis of the nanoparticles can serve as a potentially effective approach for the preparation of microanalysis reference materials.

Graphical abstract: Development of sulfide reference materials for in situ platinum group elements and S–Pb isotope analyses by LA-(MC)-ICP-MS

Supplementary files

Article information

Article type
Paper
Submitted
17 Sep 2018
Accepted
07 Nov 2018
First published
08 Nov 2018

J. Anal. At. Spectrom., 2018,33, 2172-2183

Development of sulfide reference materials for in situ platinum group elements and S–Pb isotope analyses by LA-(MC)-ICP-MS

Y. Feng, W. Zhang, Z. Hu, Y. Liu, K. Chen, J. Fu, J. Xie and Q. Shi, J. Anal. At. Spectrom., 2018, 33, 2172 DOI: 10.1039/C8JA00305J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements